sunflagsteel logo

Blog

Latest Posts

All Blogs

Wire Mesh vs Rebar

Often projects involve the usage of concrete to create long-lasting construction results. Whether you are building walls, roads or other structures like bridges, pathways etc., you can consider using Rebar or Wire Mesh under your…

Wire Mesh vs Rebar

Superalloys – Facts you must know

To match the demands of the vast growing industries, high-performance materials are needed for the highest efficiency. Ordinary steels and alloys are incapable of that higher performance. That’s where the complex and high-performance alloys come…

Supperalloy

ECT For Bars

Acceptance Criteria

Minimum defect depth and length (FBH)

  • 0.7 mm FBH from 15—60 mm dia
  • 1.2 mm FBH above 60 dia

 
Minimum defect depth and length (SDH)

  • 0.5 mm x 10 mm {from 15—120 mm dia)
  • 0.3 mm SDH sensitivity can deduced by
    extrapolation depending on material SNR.

Phased Array Auto Ultrasonic Testing Salient Features

Phased Array Technology

Phased Array testing is a specialized type of ultrasonic testing that uses sophisticated multi- element array transducers and powerful instrumentation/software to steer ultrasonic beams through the test piece and map returning echoes.

No rotating movement, only electronic scanning is done:

  • Depth focalization for bar volume inspection (LW)
  • Electronic steering for bar surface inspection (SW)

Quality Highlights:

Capacity — 15 to 120 mm dia. Full bar volume inspection

Sunflag R&D Lab Is Equipped With Following State Of The Art Equipment

  • Scanning Electron Microscope with Energy Dispersive X—Ray Spectroscope (SEM—EDS) of Make — JOEL
  • Immersion Ultrasonic Testing Facility of Make — Olympus / Blue Star
  • Optical Microscope with Automatic Multiaxis stage Movement and Image Analysis software
  • Micro—hardness tester
  • Ferritometer
  • NABL Certified Testing Lab
  • R & D Centre Recognised DSIR Government of India

Scanning Electron Microscope With Eds

  • Key Function

– Microstructure analysis
– Quantitative 8L qualitative Analysis of Inclusions

  • Failure Analysis
  • Fractography
  • Inclusion with quantitative elemental analysis

Salient Features

Dimension of samples that can be tested :

– Round Bars :

  • Size 15-120 mm die.
  • Length 800mm
  • Round Corner Square Bars:
  • Size 60420 mm

UST Prob: 10 MHz — 6mm As Per Sep 1927